Post Reply 
New RPL for 39GS
02-28-2018, 08:44 PM
Post: #1
New RPL for 39GS
I have recently acquired a 39GS for very little money from China. Now I am wondering if anyone has managed to successfully run new RPL on a 39GS and if so, where can I download the firmware?

Cheers,
Harald
Find all posts by this user
Quote this message in a reply
02-28-2018, 09:49 PM
Post: #2
RE: New RPL for 39GS
Link in first post of this thread.

Nigel (UK)
Find all posts by this user
Quote this message in a reply
02-28-2018, 11:17 PM
Post: #3
RE: New RPL for 39GS
(02-28-2018 08:44 PM)Harald Wrote:  I have recently acquired a 39GS for very little money from China. Now I am wondering if anyone has managed to successfully run new RPL on a 39GS and if so, where can I download the firmware?

Cheers,
Harald

39gs is a fully supported target on newRPL, let me know if you have any troubles.
Find all posts by this user
Quote this message in a reply
03-01-2018, 08:40 AM
Post: #4
RE: New RPL for 39GS
Thanks for the pointing me in the right direction!

Now I have a new problem. I downloaded the connectivity kit for the 39gs from the HP website. The newest version is for Win XP 32 bit. I have Win8 and apparently that is unhappy with the drivers. Any Ideas? Has anyone succesfully flashed from Win8?

Cheers,
Harald
Find all posts by this user
Quote this message in a reply
03-01-2018, 09:21 AM
Post: #5
RE: New RPL for 39GS
(03-01-2018 08:40 AM)Harald Wrote:  Thanks for the pointing me in the right direction!

Now I have a new problem. I downloaded the connectivity kit for the 39gs from the HP website. The newest version is for Win XP 32 bit. I have Win8 and apparently that is unhappy with the drivers. Any Ideas? Has anyone succesfully flashed from Win8?

Cheers,
Harald

Went through the same pain (for Windows 7) and found a newer version. Alas it is @home... and don't remember now where I found it. If nobody gives you the right link I can search this evening.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
03-01-2018, 11:39 AM
Post: #6
RE: New RPL for 39GS
(03-01-2018 08:40 AM)Harald Wrote:  Thanks for the pointing me in the right direction!

Now I have a new problem. I downloaded the connectivity kit for the 39gs from the HP website. The newest version is for Win XP 32 bit. I have Win8 and apparently that is unhappy with the drivers. Any Ideas? Has anyone succesfully flashed from Win8?

Cheers,
Harald

Maybe this will help you. If it runs on Win 10, it should work on Win 8:

Install HP 39gs CK on Windows 10

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
03-01-2018, 12:06 PM (This post was last modified: 03-01-2018 12:08 PM by Harald.)
Post: #7
RE: New RPL for 39GS
(03-01-2018 11:39 AM)toml_12953 Wrote:  
(03-01-2018 08:40 AM)Harald Wrote:  Thanks for the pointing me in the right direction!

Now I have a new problem. I downloaded the connectivity kit for the 39gs from the HP website. The newest version is for Win XP 32 bit. I have Win8 and apparently that is unhappy with the drivers. Any Ideas? Has anyone succesfully flashed from Win8?

Cheers,
Harald

Maybe this will help you. If it runs on Win 10, it should work on Win 8:

Install HP 39gs CK on Windows 10
Thanks for the link! Unfortunatelly I get the same helpfull message saying "installation failed" when trying to install those USB drivers.

Cheers,
Harald
Find all posts by this user
Quote this message in a reply
03-01-2018, 12:36 PM
Post: #8
RE: New RPL for 39GS
(03-01-2018 12:06 PM)Harald Wrote:  
(03-01-2018 11:39 AM)toml_12953 Wrote:  Maybe this will help you. If it runs on Win 10, it should work on Win 8:

Install HP 39gs CK on Windows 10
Thanks for the link! Unfortunatelly I get the same helpfull message saying "installation failed" when trying to install those USB drivers.

Cheers,
Harald

Did you disable the check for unsigned drivers? By default Win 8.x and 10 won't let you install drivers that aren't signed. You can defeat this, however:

Disable Signed Driver Enforcement

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
03-01-2018, 01:16 PM
Post: #9
RE: New RPL for 39GS
(03-01-2018 12:36 PM)toml_12953 Wrote:  
(03-01-2018 12:06 PM)Harald Wrote:  Thanks for the link! Unfortunatelly I get the same helpfull message saying "installation failed" when trying to install those USB drivers.

Cheers,
Harald

Did you disable the check for unsigned drivers? By default Win 8.x and 10 won't let you install drivers that aren't signed. You can defeat this, however:

Disable Signed Driver Enforcement

No, I did not. And unfortunately the guide in your link does not help me at all doing it. Apparently the German Windows has a completely different menu structure :-| So I will need to hunt down a German guide...
Find all posts by this user
Quote this message in a reply
03-01-2018, 02:32 PM
Post: #10
RE: New RPL for 39GS
I found a German guide and was finally able to install these drivers! Fingers crossed there are no more stumbling stones on the way to an HP39gs with newRPL Smile
Find all posts by this user
Quote this message in a reply
03-01-2018, 09:49 PM
Post: #11
RE: New RPL for 39GS
Thanks to everyone for the hints! I now have a 39gs running newRPL!

"All" I have to do now is get my head round how it is operated.

Cheers,
Harald
Find all posts by this user
Quote this message in a reply
03-01-2018, 10:00 PM
Post: #12
RE: New RPL for 39GS
(03-01-2018 09:49 PM)Harald Wrote:  Thanks to everyone for the hints! I now have a 39gs running newRPL!

"All" I have to do now is get my head round how it is operated.

Cheers,
Harald

Great! Congratulation! Smile

I am still waiting to get mine shipped from China (it is Chinese new year, and they stand completely still for several weeks).

HP 35s, HP 50g, HP Elite X3, SwissMicros DM42
Find all posts by this user
Quote this message in a reply
03-01-2018, 10:21 PM
Post: #13
RE: New RPL for 39GS
(03-01-2018 09:49 PM)Harald Wrote:  Thanks to everyone for the hints! I now have a 39gs running newRPL!

"All" I have to do now is get my head round how it is operated.

Cheers,
Harald

Welcome to the newRPL gang! May the Wiki be your guide. Be vocal if things on the wiki or newRPL are not to your specs, comments are always welcome.
Find all posts by this user
Quote this message in a reply
03-23-2019, 06:08 AM
Post: #14
RE: New RPL for 39GS
Thanks to Claudio for this tool, it is fabulous, recently I installed newRPL on my HP 39gs and I am getting used to its operation, but I do not know how to transfer files from the PC to the calculator. I suppose you can install applications and programs from the HP 50g in the HP 39gs because they are compatible at the RPL level, but how are they copied to the HP 39gs? The connectivity kit of the HP 39gs I managed to install in windows 10 but does not recognize the calculator with the newRPL already installed. I tried to use the newRPL virtual calculator from HP 39 but I do not know if it is useful to transfer the files to the physical calculator or how it is done. Could you give me a light in this regard? Thank you...
Find all posts by this user
Quote this message in a reply
03-26-2019, 06:39 PM
Post: #15
RE: New RPL for 39GS
(03-23-2019 06:08 AM)math7 Wrote:  Thanks to Claudio for this tool, it is fabulous, recently I installed newRPL on my HP 39gs and I am getting used to its operation, but I do not know how to transfer files from the PC to the calculator. I suppose you can install applications and programs from the HP 50g in the HP 39gs because they are compatible at the RPL level, but how are they copied to the HP 39gs? The connectivity kit of the HP 39gs I managed to install in windows 10 but does not recognize the calculator with the newRPL already installed. I tried to use the newRPL virtual calculator from HP 39 but I do not know if it is useful to transfer the files to the physical calculator or how it is done. Could you give me a light in this regard? Thank you...

Here: http://www.hpmuseum.org/forum/thread-9700.html

Connect the Desktop to your calc (pretty intuitive, just select from the list and done). Then the post above has some description of the commands you can use to send stuff over the wire (look at the notes for build 1001)
If you can't see your calc on the connect dialog box, check out the wiki for USB setup required on all OSes except Windows.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)