The Museum of HP Calculators

HP Forum Archive 21

[ Return to Index | Top of Index ]

HP Prime recharging
Message #1 Posted by bluesun08 on 24 Oct 2013, 11:58 a.m.

I forgot recharging the HP Prime. The akku is now absolutely empty and the calculator don't start up any more. The display remains black. What can I do?

      
Re: HP Prime recharging
Message #2 Posted by Cristian Arezzini on 24 Oct 2013, 12:52 p.m.,
in response to message #1 by bluesun08

I don't know about the Prime specifically, but many digital tools with lithium batteries won't turn on until the battery has a certain minimum charge. For example my old phone, if I let it discharge completely, then I had to plug it to the charger for about 10 minutes before it would even turn on. I'd just try leaving it plugged in for some time.

      
Re: HP Prime recharging
Message #3 Posted by Dieter on 24 Oct 2013, 1:05 p.m.,
in response to message #1 by bluesun08

Simply plug in the charger and wait for half an hour until the voltage level is sufficient for powering up.

The Prime unes a rechargeable lithium-ion battery. The common standard for these batteries is a built-in circuitry that prevents discharge below a certain limit (and overcharge as well, for that matter) to protect the battery against damage. At that point the device is turned off and will not turn on again until a safe voltage level is reached again.

Dieter

      
Re: HP Prime recharging
Message #4 Posted by Paul Townsend (UK) on 24 Oct 2013, 2:53 p.m.,
in response to message #1 by bluesun08

Thanks for explaining that. Today in work I had a query about a device (not an HP calculator but using that type of battery) which we had supplied to a customer. Our test/development unit in the office refused to turn on until the charger had been on for about 5 minutes (their phone bill not ours!) Now we know why.

            
Re: HP Prime recharging
Message #5 Posted by Mike Powell on 24 Oct 2013, 6:08 p.m.,
in response to message #4 by Paul Townsend (UK)

Li-Ion batteries do not appreciate being left below a certain threshold voltage , you can damage or at best wipe lifetime off the battery. As mentioned there is circuitry built in to prevent use below that threshold, BUT there is also small self discharge and possiblly a small discharge from stuff they can't disconnect from the battery in this state. So don't leave it in a discharged state.


[ Return to Index | Top of Index ]

Go back to the main exhibit hall