HP Forum Archive 21

[ Return to Index | Top of Index ]

DM-15CC questions Message #1 Posted by x34 on 4 Aug 2012, 5:32 a.m. 1. Every time I connect my DM-15CC to computer via USB I see big voltage drop of the battery (0.1-0.15V usually) after several mnutes. Is it ok? 2. Any success using program save/load? Translator at http://www.rpn-calc.ch/nut_decoder.html fails to decode almost all programs. Some commands are not supported or are decoded wrong way. I'm sure that's because I do not understand how to use it properly. x34

Re: DM-15CC questions Message #2 Posted by Torsten on 6 Aug 2012, 11:32 a.m., in response to message #1 by x34 I'm in contact with Michael because I'm extending my HP-15C simulator to interact with the DM-15CC. Two weeks ago they were working on a new firmware and saving/loading of programs had lower priority. Michael confirmed that the decoder doesn't work all right. Torsten

Re: DM-15CC questions Message #3 Posted by x34 on 7 Aug 2012, 2:45 a.m., in response to message #2 by Torsten Thanks, will wait and enjoy the calc.

[ Return to Index | Top of Index ]

Go back to the main exhibit hall