HP Forum Archive 21

[ Return to Index | Top of Index ]

WP34S rev. 2668 bug report Message #1 Posted by Harald on 6 Apr 2012, 5:35 p.m. Stacklift gets disabled by turning the calculator off and back on. For example, 2 Enter 3 x results in 6. After turning the calculator off an back on the 6 is still there. Another calculation, for example 3 Enter 5 * then results in 15. But roll down doesn't get the 6 back as expected. I am not sure if the problem is still present in the latest revision (sorry, I can't flash since I am on holiday). Cheers, Harald

Re: WP34S rev. 2668 bug report Message #2 Posted by Walter B on 6 Apr 2012, 5:54 p.m., in response to message #1 by Harald Thanks for reporting. Not observed, however, in emulator build 2758 (the latest revision available) nor on my 30b-based 34S build 1108 (the earliest revision available). Thus, must have happened in between. HTH ;-)

Re: WP34S rev. 2668 bug report Message #3 Posted by fhub on 6 Apr 2012, 5:59 p.m., in response to message #2 by Walter B And I hope this one is not be overlooked because it's already moved down a few posts: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi?read=216969#216969 It's a quite serious problem. :(

Re: WP34S rev. 2668 bug report Message #4 Posted by pascal_meheut on 6 Apr 2012, 10:59 p.m., in response to message #3 by fhub I cannot reproduce it neither on a real WP34s running the last revision.

Re: WP34S rev. 2668 bug report Message #5 Posted by fhub on 7 Apr 2012, 5:19 a.m., in response to message #4 by pascal_meheut Quote: I cannot reproduce it neither on a real WP34s running the last revision. Sorry, but then you must have done something wrong. It's impossible that this bug happens here for me in both emulators (standard and QtGui, latest versions) but not for you. So once again, program simplified: LBL A 1 STOP 3 RTN LBL 21 2 RTN Now do exactly the following steps: 1) press [A] and you'll see 1 in X 2) press XEQ STO and you'll see 2 from subroutine LBL 21 3) and now press R/S and you'll still see the 2 from LBL 21 instead of the 3 from the main program Edited: 7 Apr 2012, 5:20 a.m.

Re: WP34S rev. 2668 bug report Message #6 Posted by Walter B on 7 Apr 2012, 5:25 a.m., in response to message #5 by fhub Franz, you were hijacking this thread :-( Pascal's response referred to the OP. Please (!) continue your old thread with that error you refer to, don't mess up things.

Re: WP34S rev. 2668 bug report Message #7 Posted by fhub on 7 Apr 2012, 5:31 a.m., in response to message #6 by Walter B Quote: Franz, you were hijacking this thread :-( Pascal's response referred to the OP. Please (!) continue your old thread with that error you refer to, don't mess up things. I'd say you are messing up things, Walter. I don't know what you mean by OP, but Pascal definitely replied to MY post - have a look again. And posting a different bug in another bug report is nothing what I would call hijacking.

Re: WP34S rev. 2668 bug report Message #8 Posted by pascal_meheut on 7 Apr 2012, 6:04 a.m., in response to message #7 by fhub Quote: I don't know what you mean by OP, but Pascal definitely replied to MY post - have a look again. No. I was responding to the bug described in this thread. Sorry if I clicked "respond" not exactly after the exact message. BTW, I would not answer to your post and talk about your bug in this thread. I would have gone to the original one.

Re: WP34S rev. 2668 bug report Message #9 Posted by Walter B on 7 Apr 2012, 5:27 a.m., in response to message #3 by fhub Quote: And I hope this one is not be overlooked because it's already moved down a few posts: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi?read=216969#216969 It's a quite serious problem. :( Maybe. Please continue your old thread and it will move up again. Don't hijack other threads >:-(

Re: WP34S rev. 2668 bug report Message #10 Posted by Marcus von Cube, Germany on 7 Apr 2012, 3:38 a.m., in response to message #1 by Harald IIRC this has been addressed in the later builds.

Re: WP34S rev. 2668 bug report Message #11 Posted by Mark Scheuern on 7 Apr 2012, 7:29 a.m., in response to message #10 by Marcus von Cube, Germany I just re-flashed from 2668 to 2726; the bug was in the earlier version but is fixed in 2726.

Re: WP34S rev. 2668 bug report Message #12 Posted by Harald on 8 Apr 2012, 3:42 p.m., in response to message #11 by Mark Scheuern Sorry for reporting a bug that has already been fixed again. I will flash with the latest version when I get back. Cheers, Harald

Re: WP34S rev. 2668 bug report Message #13 Posted by Paul Dale on 8 Apr 2012, 6:17 p.m., in response to message #12 by Harald Not a problem, it is far better for a bug to be reported a few times than not at all. - Pauli

[ Return to Index | Top of Index ]

Go back to the main exhibit hall