HP Forum Archive 20

[ Return to Index | Top of Index ]

HP 15c LE Case Message #1 Posted by Brandon Poindexter on 23 Jan 2012, 9:47 p.m. I've had my PH 15c LE for a good month now. But I had this nagging feeling that the case I was supplied with wasn't as "high end" as I had hoped. And after reading the following post: HP 15c LE and 12c and by viewing the following jpeg: has me to believe that I was supplied with the HP 12c case (mine is not texture-marbled like the top one, but instead is flat). I'm not up in arms about it or anything, just a tad bummed is all. I must say though that the 15c LE case "looks" a tad better feeling compared to the one supplied for the 12c. Which leads me to the question, has anyone bought these Voyager Cases on eBay? The rigid front/back is the reason I'd like it, but not sure 100% if these are any good. Does anyone have experience with them? Edited: 23 Jan 2012, 10:27 p.m. after one or more responses were posted

Re: HP 15c LE Case Message #2 Posted by Michael de Estrada on 23 Jan 2012, 10:05 p.m., in response to message #1 by Brandon Poindexter Quote: Which leads me to the question, has anyone bought these Voyager Cases on eBay? The rigid front/back is the reason I'd like it, but not sure 100% if these are any good. Does anyone have experience with them? I've bought 3 of them and like them a lot. They are well made with nice leather and fit very well. It's easy to insert and remove the calculator, and they appear quite sturdy. The cases supplied with HP 15C LE are useless crap, and are much worse than the original Voyager cases.

Re: HP 15c LE Case Message #3 Posted by Brandon Poindexter on 23 Jan 2012, 10:29 p.m., in response to message #2 by Michael de Estrada Cool! I guess ill try it out. I was a bit spoiled with the case that came with the HP 35s, as I always kept it in its case. Thanks for your feedback.

Re: HP 15c LE Case Message #4 Posted by Michael de Estrada on 23 Jan 2012, 10:49 p.m., in response to message #3 by Brandon Poindexter Even the case that came with the 33s is very nice. It's a similar slip case design with hard top and bottom pieces, although it is not leather. I certainly would have rather had a nice slip case with 15C LE, and dispensed with the silly presentation case.

Re: HP 15c LE Case Message #5 Posted by bill platt on 23 Jan 2012, 11:17 p.m., in response to message #4 by Michael de Estrada The standard voyager cases were never leather, either (the standard black ones)...

Re: HP 15c LE Case Message #6 Posted by Michael de Estrada on 23 Jan 2012, 11:41 p.m., in response to message #5 by bill platt I never said they were leather, but they were better made with thicker material and thinner seams, so you could easily insert and remove the calculator. Have you tried inserting or removing a 15C LE from it's case ? Not easy at all.

Re: HP 15c LE Case Message #7 Posted by bill platt on 24 Jan 2012, 12:13 a.m., in response to message #6 by Michael de Estrada I didn't buy an LE. I have two original Corvallis 15C...

Re: HP 15c LE Case (improving the fit) Message #8 Posted by Nick_S on 24 Jan 2012, 4:12 a.m., in response to message #6 by Michael de Estrada Quote: Have you tried inserting or removing a 15C LE from it's case ? Not easy at all This problem can be solved by turning the vinyl case inside-out and carefully trimming the excess fabric closer to the seam all the way round. Then, just reverse it and the calculator can slide in and out more easily. Note that all three of my HP-15C LE calculators have the fine-grained vinyl case, rather than the marble textured one. Nick Edited: 24 Jan 2012, 4:18 a.m.

Re: HP 15c LE Case (improving the fit) Message #9 Posted by Bart (UK) on 24 Jan 2012, 6:27 a.m., in response to message #8 by Nick_S Quote: This problem can be solved by turning the vinyl case inside-out and carefully trimming the excess fabric closer to the seam all the way round. I haven't had to do this with the old ones. For that matter why should we be doing HP's work? It's easily done, but that's not the point. And yes, I know it's cheaper than 30 years ago, but then so are many things for which we don't expect to have have to do the finishing touches ourselves.

Re: HP 15c LE Case Message #10 Posted by Thomas Radtke on 24 Jan 2012, 3:42 a.m., in response to message #2 by Michael de Estrada Quote: I've bought 3 of them and like them a lot. They are well made with nice leather and fit very well. It's easy to insert and remove the calculator, and they appear quite sturdy. The seller even offers inexpensive shippment to Europe. Just ordered one :-).

Re: HP 15c LE Case Message #11 Posted by Reth on 24 Jan 2012, 3:48 a.m., in response to message #10 by Thomas Radtke Me too, to Australia

Re: HP 15c LE Case Message #12 Posted by Raymond Wiker on 24 Jan 2012, 10:46 a.m., in response to message #2 by Michael de Estrada Quote: I've bought 3 of them and like them a lot. They are well made with nice leather and fit very well. It's easy to insert and remove the calculator, and they appear quite sturdy. The cases supplied with HP 15C LE are useless crap, and are much worse than the original Voyager cases. I just ordered 3 - one for my HP-16C, one for an HP-12C that I rescued at work, and one for my HP-15C LE.

Re: HP 15c LE Case Message #13 Posted by John Robinson on 24 Jan 2012, 6:03 p.m., in response to message #12 by Raymond Wiker They look much better than those crappy 12C 25th Anniversary cases ! Cheers, John

[ Return to Index | Top of Index ]

Go back to the main exhibit hall