The Museum of HP Calculators

HP Forum Archive 20

[ Return to Index | Top of Index ]

GETROM doubt
Message #1 Posted by robertoataulfo on 12 Jan 2012, 7:44 a.m.

When I load a rom using HP ILPer and GETROM, recorded using saverom. How do I access this ROM on my HP-41CL?

Edited: 12 Jan 2012, 12:11 p.m. after one or more responses were posted

      
Re: GETROM doubt
Message #2 Posted by Geir Isene on 12 Jan 2012, 10:40 a.m.,
in response to message #1 by robertoataulfo

What does the word "doubt" mean in the heading?

            
Re: GETROM doubt
Message #3 Posted by robertoataulfo on 12 Jan 2012, 11:25 a.m.,
in response to message #2 by Geir Isene

Als ich ein ROM mit HP ILPer und GETROM, aufgenommen mit saverom laden. Wie greife ich auf dieses ROM auf meinem HP-41CL?

Edited: 12 Jan 2012, 12:12 p.m. after one or more responses were posted

                  
Re: GETROM doubt
Message #4 Posted by Raymond Del Tondo on 12 Jan 2012, 1:52 p.m.,
in response to message #3 by robertoataulfo

It's the same as with SAVEROM: (Target) page number in X, mass storage filename in Alpha.
You only have to make sure that the page number contains RAM, but that should be described in the 41CL manual;-)

So if you previously stored a ROM file on tape with Alpha containing "ND1",
and now want to get that ROM back into the calc, put ND1 into Alpha, the wanted page number into X, and XEQ GETROM .

                        
Re: GETROM doubt
Message #5 Posted by robertoataulfo on 12 Jan 2012, 2:05 p.m.,
in response to message #4 by Raymond Del Tondo

Before testing in 41cl, I tested the emu41 (Page 8 Module 4k) but he did not appear in catalog 2.

Command: 8 in X 'TEST' in Alpha getrom (no error)

my config (EMU41)

; emu41.ini emu41 init file

[MODULES] ; page size filename 0 12 rom41cx.bin 3 4 cxfcn2d.bin 5 8 cxtime2c.bin 6 4 prter1e.bin 7 4 hpil1h.bin ; ------------ 10 4 CCD_OSX.BIN

[DEVICES] DISPLAY HDRIVE1 HD41.DAT LPRTER1 DOSLINK

Edited: 12 Jan 2012, 2:19 p.m.

                              
Re: GETROM doubt
Message #6 Posted by Raymond Del Tondo on 12 Jan 2012, 3:29 p.m.,
in response to message #5 by robertoataulfo

Your Emu41 config doesn't include a "RAM" page at address 8 .
so the target page wasn't prepared to accept a ROM image download.
You'll have to include a line like
8 4 MLDLRAM.DAT ; RAM
into Emu41.ini , and after a restart of Emu41 there will be a RAM page at address 8.
Please take a look into Emu41.doc for more details.

Once the above config is active, your GETROM of 'TEST' to page 8 should work;-)

      
Re: GETROM doubt
Message #7 Posted by Juergen Keller on 12 Jan 2012, 3:08 p.m.,
in response to message #1 by robertoataulfo

You'll find an example procedure in Geoff's quick ref guide (CLONIX is used there, but the procedure is similar). Grab it here.

Edited: 12 Jan 2012, 3:10 p.m.

            
Re: GETROM doubt
Message #8 Posted by robertoataulfo on 12 Jan 2012, 4:24 p.m.,
in response to message #7 by Juergen Keller

thank's all


[ Return to Index | Top of Index ]

Go back to the main exhibit hall