HP Forum Archive 19

[ Return to Index | Top of Index ]

Two questions: 38g/39gs aplets and HP ODU Message #1 Posted by bbeamer on 23 July 2009, 4:07 p.m. Will aplets for the 39gs run on a 38g? I thought I could save some frustration if the answer is no. Also, with the HP overhead display unit, can I use the cable for the unit that has the 10 pin adapter for the 38g and 49g with this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=330344807098 and connect the unit to the serial port on a 48s or 48g? Thanks, Brian Edited: 25 July 2009, 11:37 p.m.

Re: Two questions: 38g/39gs aplets and HP ODU Message #2 Posted by Marcus von Cube, Germany on 26 July 2009, 12:16 p.m., in response to message #1 by bbeamer Not answering the second question, sorry. The applet format has changed between the 38G and it successors, they are not directly compatible. I can't tell from the top of my head whether there is a conversion utility.

Re: Two questions: 38g/39gs aplets and HP ODU Message #3 Posted by bbeamer on 26 July 2009, 4:18 p.m., in response to message #2 by Marcus von Cube, Germany Thanks. The adapter is on its way to me. I'll give it a try with the ODU and post the results. Brian

Re: Two questions: 38g/39gs aplets and HP ODU Message #4 Posted by bbeamer on 28 July 2009, 6:00 p.m., in response to message #1 by bbeamer Just in case anyone was wondering, I tried the above adapter today. It does not allow the 48s/g to work with the ODU directly from the serial port. Brian

[ Return to Index | Top of Index ]

Go back to the main exhibit hall