The Museum of HP Calculators

HP Forum Archive 18

[ Return to Index | Top of Index ]

Forth / Fortran77 for HP-1000CX
Message #1 Posted by Roland Storz on 26 Mar 2008, 6:11 a.m.

Hello All, does anybody have experiences with a Forth and / or a Fortran77 Compiler which can be utilized in a HP-1000CX (HP200LX)?

Both the HP-1000CX and the HP-200LX carry a 80186 CPU.

In the web you can find hundreds of free compilers, however particularly for the 80186 it seems to be a problem to find sth. suitable. Specifically Fortran77 seems even more complicated. Thanks in advance for any advice or help. Kind Regards, Roland

      
Re: Forth / Fortran77 for HP-1000CX
Message #2 Posted by Bill (Smithville, NJ) on 26 Mar 2008, 7:05 a.m.,
in response to message #1 by Roland Storz

Hi Roland,

You might want to try BC-Fortran77. I haven't tested it on the HP-200, but it claims to run on a MS-DOS with 640K memory, so it should work. Following is link:

BC-Fortran77

Bill

      
Re: Forth / Fortran77 for HP-1000CX
Message #3 Posted by John Pierce on 26 Mar 2008, 10:25 a.m.,
in response to message #1 by Roland Storz

Try Frank Sargeant's PYGMY FORTH. It is available as shareware, and was available on the FIG-FORTH website. There was even a tailored version available for the 100LX but I used in on the 200LX.

      
Re: Forth / Fortran77 for HP-1000CX
Message #4 Posted by Dave Shaffer (Arizona) on 26 Mar 2008, 2:50 p.m.,
in response to message #1 by Roland Storz

I used to use Lahey fortran77 on a PC/AT (80286) processor with great success, and I think I even used it a time or two on a 80186 machine. For number crunching, you really want the math coprocessor (80287; was there a 80187?).

I'm not sure they still sell the 77 compiler, though. Maybe you can find it "used" somewhere.

            
Re: Forth / Fortran77 for HP-1000CX
Message #5 Posted by Roland Storz on 27 Mar 2008, 6:05 a.m.,
in response to message #4 by Dave Shaffer (Arizona)

Hi gents, I really do appreciate your responses, all this is very helpful to me, it certainly will take some time to find out best and most suitable alternative based on your recommendations, quite honest: initially I felt pretty much alone with my crazy idea not to choose QBasic as favorite, however, obviously I'm not the only one.... again, many thanks to all of you, Roland

      
Re: Forth / Fortran77 for HP-1000CX
Message #6 Posted by Bill Smith on 27 Mar 2008, 8:27 p.m.,
in response to message #1 by Roland Storz

I can verify that Lahey personal fortran77 (v3.1?) works on the 200LX. There is a switch to turn on/off math coprocesser support. I'd think there would be a lot of used copies available, as this was marketed to students.


[ Return to Index | Top of Index ]

Go back to the main exhibit hall