HP Forum Archive 18

[ Return to Index | Top of Index ]

HP 19C... Message #1 Posted by Luis on 15 Mar 2008, 1:11 p.m. ...does anybody know how to open it? Thanks in advance! Luis

Re: HP 19C... Message #2 Posted by Raymond Del Tondo on 15 Mar 2008, 8:06 p.m., in response to message #1 by Luis Many HP calculators have the screws underneath the rubber feet, some also have screws covered with informational stickers, and/or behind a plastic cap, like the HP-65 and 67. I don't have a 19C right here (they're all packed away), but I suspect the screws to be in the usual places, as mentioned above. HTH Raymond

Re: HP 19C... Message #3 Posted by Luis on 16 Mar 2008, 3:25 p.m., in response to message #2 by Raymond Del Tondo Hi Raymond, Thanks for your reply. There are 3 screws underneath: 2 in the battery compartment and 1 close to the charger receptacle. I have unscrewed all 3 but the two halfes were still in place. I'm not willing to try under the back label in order to keep its original condition unless I'm sure there are more screws. Thanks anyway! Luis

Re: HP 19C... Message #4 Posted by RonaldP on 16 Mar 2008, 5:47 p.m., in response to message #3 by Luis there are 4 crews: 2 in the battery compartment, one under the rubber feet on the top and one near the connection for the charger. If you have removed these screws it will open more or less lik a shell with the hinges at the bottom side of the calculator. There are NO screws under the lable!. Hope this helps Ronald

Re: HP 19C... Message #5 Posted by RonaldP on 16 Mar 2008, 5:49 p.m., in response to message #4 by RonaldP Hi, Back again, I forgot to say, if you need some pictures of the opened HP19C to the places for the scres, send me message please or leave your e-mail address. Ronald

Re: HP 19C... Message #6 Posted by Luis on 17 Mar 2008, 7:08 p.m., in response to message #5 by RonaldP Hi Ronald I knew some expert guy would know how to do it! I'll give a try and let you know then. Many thanks! Luis

Re: HP 19C... Message #7 Posted by Ronald P on 18 Mar 2008, 3:30 p.m., in response to message #6 by Luis Succes! Ronald

[ Return to Index | Top of Index ]

Go back to the main exhibit hall