HP Forum Archive 16

[ Return to Index | Top of Index ]

HP48GX compatibility Message #1 Posted by Iņigo Rodriguez on 5 July 2006, 10:25 a.m. Hi all Does anybody use the HP41cv emulation card with the HP 48gx calculator? It was originally made to run on a HO 48 sx. Thanks for your attention. Iņigo

Re: HP48GX compatibility Message #2 Posted by bill platt on 5 July 2006, 11:44 a.m., in response to message #1 by Iņigo Rodriguez I recall some issues with that. A better solution is to get Rastprogrammer's 41 emulator. He has a pretty awesone freeware version, but if you send him some euros, or dollars, it is a total powerhouse. BTW yo ucan emulate a 41c, a cv, or a cx as you may desire :-)

Re: HP48GX compatibility Message #3 Posted by Iņigo Rodriguez on 5 July 2006, 12:03 p.m., in response to message #2 by bill platt Thank you bill Where can I get this program?

Re: HP48GX compatibility Message #4 Posted by Antoine M. Couëtte on 5 July 2006, 1:01 p.m., in response to message #3 by Iņigo Rodriguez Dear Inigo, You will get information on Hrastprogrammer's emulators at the following address. http://www.hrastprogrammer.com/ I am an highly enthusiastic fan of Hrastprogrammer's HP41X/Z Emulator as you will be able to understand from the following thread : http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=91719#91719 Best Regards Antoine M. Couëtte

Re: HP48GX compatibility Message #5 Posted by Matthias Wehrli on 5 July 2006, 1:27 p.m., in response to message #4 by Antoine M. Couëtte Hi As I know the HP-41 Emulation card of HP does not work on the GX version, because there are direct jumps in the addressing due to increase itīs speed. I only know one single card that works stable in a GX.... catch it if you can ;)

Re: HP48GX compatibility Message #6 Posted by bill platt on 5 July 2006, 2:54 p.m., in response to message #5 by Matthias Wehrli We are such an international group aren't we :-)

Re: HP48GX compatibility Message #7 Posted by Iņigo Rodriguez on 5 July 2006, 3:40 p.m., in response to message #6 by bill platt Itīs fine. One question and people of four countries talking about it.

Re: HP48GX compatibility Message #8 Posted by Raymond Del Tondo on 5 July 2006, 5:42 p.m., in response to message #5 by Matthias Wehrli Hi Matthias, I know this card, too;-) Regards Raymond

Re: HP48GX compatibility Message #9 Posted by Chan Tran (USA) on 5 July 2006, 8:23 p.m., in response to message #8 by Raymond Del Tondo I have the emulator card as well as both the 48SX and GX. I could never get the card to work on the GX correctly.

HP41CV Emulator card and GX [Was: Re: HP48GX compatibility] Message #10 Posted by Raymond Del Tondo on 6 July 2006, 12:15 a.m., in response to message #9 by Chan Tran (USA) Hi, yes, I know;-) There were some threads in the past where I explained why the original card won't work in the GX. However, the HP41CV emulator card Matthias mentionned is a very special one, there exists only one of its kind (ok, actually two, because I have the 'master' card;-) It contains the only (Zengrange) HP41CV emulator version which works reliably on the HP-48GX. This version was not published yet to the public due to copyright reasons... Regards Raymond

Re: HP48GX compatibility Message #11 Posted by HrastProgrammer on 6 July 2006, 4:48 a.m., in response to message #4 by Antoine M. Couëtte :-)

Re: HP48GX compatibility Message #12 Posted by Iņigo Rodriguez on 6 July 2006, 5:29 a.m., in response to message #11 by HrastProgrammer Hi Please tell me haw can I buy the emilation, payment, etc. Thanks

Re: HP48GX compatibility Message #13 Posted by HrastProgrammer on 6 July 2006, 6:59 a.m., in response to message #12 by Iņigo Rodriguez As Antoine wrote above, you can find all info on: http://www.hrastprogrammer.com/

[ Return to Index | Top of Index ]

Go back to the main exhibit hall