HP Forum Archive 15

[ Return to Index | Top of Index ]

Converting hp3468 from 115 to 230V ? Message #1 Posted by Francois on 12 Jan 2006, 4:36 p.m. Hello, Is it easy to convert an US HP3468 Digital MultiMeter from 115 VAc to 230 VAC for use in France ? (It's quite difficult to find in europe, so before searching in the US I prefer asking if transformation is possible or not) Is the power supply a transformer or a switching supply ? Thank you Francois

Re: Converting hp3468 from 115 to 230V ? Message #2 Posted by Ronald on 12 Jan 2006, 5:07 p.m., in response to message #1 by Francois Hi, Yes this is very simple. Drop me a mail when you have aquired one and I will mail you the page from the service manual. It is just soldering one wire at another place on the circuit board. Ronald

Re: Converting hp3468 from 115 to 230V ? Message #3 Posted by Etienne Victoria on 12 Jan 2006, 6:37 p.m., in response to message #1 by Francois Bonsoir, Oui, c'est simple, je le décris dans le fil ci-après: ici. Cordialement Etienne ____________________________________________________________________ Hello, Yes, it's quite simple and described in the post hereafter: here. Best. Etienne

Re: Converting hp3468 from 115 to 230V ? Message #4 Posted by Francois on 13 Jan 2006, 3:33 p.m., in response to message #3 by Etienne Victoria Thank you for the information, now i have to find a 3468. It's more easy in US I think. Merci pour ton post, Etienne, cela semble vraiment simple. Utilises tu couramment le 3468 ? Best regards François (North of France)

Re: Converting hp3468 from 115 to 230V ? Message #5 Posted by Etienne Victoria on 13 Jan 2006, 3:51 p.m., in response to message #4 by Francois Finding one should be easy --> Ebay has plenty! I use mine on a regular basis when repairing Hp-calcs, printing out voltage measurements. Friendly regards from Fourqueux (78) (free advertisement) A ta disposition pour toute info. Etienne

[ Return to Index | Top of Index ]

Go back to the main exhibit hall