HP Forum Archive 15

[ Return to Index | Top of Index ]

Display for HP48G Message #1 Posted by Tvrtko on 10 June 2005, 8:14 a.m. Does anybody have spare display for HP48G? I fell from my bike and destroy it! bad luck.

Display for HP48G Message #2 Posted by Tvrtko on 10 June 2005, 8:21 a.m., in response to message #1 by Tvrtko I forgot to add... it will be also suitable some malfunctional HP calc with equivalent display... i'm desperate :)

Re: Display for HP48G Message #3 Posted by Raymond Del Tondo on 10 June 2005, 10:48 a.m., in response to message #2 by Tvrtko Hi, it may be easier to get a replacment HP-48. as the correct alignment of the display contacts doesn't semm to be easy. Raymond

Display for HP48G Message #4 Posted by Tvrtko on 10 June 2005, 11:04 a.m., in response to message #3 by Raymond Del Tondo I didn't think about that... have you ever try to replace display on HP48G? i know it can by quite annoying and difficult... when I was trying to do that on some other fine pitch display contacts, and that thiny conductive rubber, I lost my hair.... maybe it is time to say goodbye... but... that calc was wakeing me up 7 years... tut ut tut ut

Re: Display for HP48G Message #5 Posted by Vieira, Luiz C. (Brazil) on 10 June 2005, 11:23 a.m., in response to message #4 by Tvrtko Hi; I have once made a franken48 from two bad units. The good mainboard had a broken LCD and the one with a good LCD had the mainboard destroyed by a butcher that menat to open it... with a huge knowfe or screwdriver (in this action, the tool went beyond the name...). The fact is that the LCD is actually glued to the metal frame where it is built in, so aligning the circuit board with all thin contactcs to the LCD is not that hard. I've done this twice with the HP48 and half a doze others with Pioneers. None failled. My 2¢ ... Luiz (Brazil) Edited: 10 June 2005, 12:38 p.m.

Display for HP48G Message #6 Posted by Tvrtko on 13 June 2005, 11:41 a.m., in response to message #5 by Vieira, Luiz C. (Brazil) Thanx! Gracias! Hvala! Fala! The quest for holy display is going on... i'll be back, when i find display! because i don't know how to dismantle HP... or if I find cheap second hand HP, dismantling will not be necessary... HP FORUM RULZ! Rasulo se svud po svitu to splitsko :) staro sime... zivio!

Re: Display for HP48G Message #7 Posted by Nenad (Croatia) on 11 June 2005, 5:46 p.m., in response to message #4 by Tvrtko Just to support Raymond's opinion: it would ber easiest to find a replacement HP48G e.g. on the ebay. And a few words in Croatian (the same as above): Svakako treba probati njemacki ebay. Vrlo cesto se pojavi jeftin HP48G, u izvrsnom stanju, a postarina takodjer ne bude preskupa. Pozdrav iz Splita

Display for HP48G Message #8 Posted by Tvrtko on 13 June 2005, 11:45 a.m., in response to message #7 by Nenad (Croatia) thanx pal! or on croatian: zivio ti meni rodjo! ugodno me iznenadi! fala jos jednom....

[ Return to Index | Top of Index ]

Go back to the main exhibit hall