ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT Message #1 Posted by Emmanuel, France on 10 Mar 2005, 7:03 p.m.
Please help ...
I got this item from a friend and I was not able to access its 32K (64K or 128K) RAM.
I used ES-RSU1A & 2A, Zenrom and Rambox but nothing happened?!
The first 8K ROM returned NO RSU PAGE when INIPRGM a page.
It seems to need a special software according to its label.
No switch available outside.
However there's two switches inside with two positions for each.
Thanks for help.
12345
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT Message #2 Posted by Christoph Klug on 11 Mar 2005, 4:27 a.m., in response to message #1 by Emmanuel, France
Dear Emmanuel,
does your RAM-Bos lost the internal operating system ? Or is this available on port E and F ?
Regards - Christoph
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT Message #3 Posted by Emmanuel on 11 Mar 2005, 9:57 a.m., in response to message #2 by Christoph Klug
There's no OS in the RAMBOX and impossible to write in it ?!
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT Message #4 Posted by Christoph Klug on 11 Mar 2005, 11:13 a.m., in response to message #3 by Emmanuel
Dear Emmanuel,
may be your RAM-Box have an hardware failure. Normally - after reasing the pages you are able to load ROM-images to the RAM-Box by using an OS (stored on Zeprom or Clonix)
From which source you get the RAM-Box
Regards - Christoph
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT Message #5 Posted by Donald1800 on 12 Mar 2005, 3:42 a.m., in response to message #1 by Emmanuel, France
As I recall, (and this is going WAY back), the RSU RAM unit required a seperate OS ROM plugin module to function.
Go back to the main exhibit hall