The Museum of HP Calculators

HP Forum Archive 14

[ Return to Index | Top of Index ]

HP9114A Disc Drive Problem
Message #1 Posted by Jeff on 8 Feb 2004, 7:22 p.m.

I finally have replaced the battery in my 9114A drive. When I turn the unit on, the drive is accessed and the fault light stays on for a short time while the unit self tests. When I try to access via the "INITIALIZE" command on the HP-71B, I get a "NO MEDIUM" error. I then tried to use my HP-41CX and used the "NEWM" command and again receive a "NO MEDM" error. I also tried the HP-110 Portable Plus but cannot get the mavchine to read the disc. Does anyone have any suggestions? Thanks, Jeff

      
Re: HP9114A Disc Drive Problem
Message #2 Posted by David Smith on 9 Feb 2004, 5:25 p.m.,
in response to message #1 by Jeff

The drive uses only single sided diskettes. To use double sided ones, you must cover the holes near the top corners of the diskette with opaque tape.

            
Re: HP9114A Disc Drive Problem
Message #3 Posted by Jeff on 9 Feb 2004, 6:49 p.m.,
in response to message #2 by David Smith

Thanks for the reply David. I used to have the HP9114B drive and had saved the disc that I used for that unit. This is the one I tried to use for the 9114A. There must be some subtle differences between the two regarding the single sided disc's. Thanks, Jeff

            
Re: HP9114A Disc Drive Problem
Message #4 Posted by Jeff on 9 Feb 2004, 8:38 p.m.,
in response to message #2 by David Smith

David, your right, all I needed was to place the tape over the hole. Emmanuel also told me this but I was struggling to understand why the 9114B did not require this. Any way, thanks much. Jeff

            
Re: HP9114A Disc Drive Problem
Message #5 Posted by Vassilis Prevelakis on 11 Feb 2004, 8:34 p.m.,
in response to message #2 by David Smith

Yes that will work, but do be aware that newer floppies (Quad density) have different magnetic characteristics from the Double Density used by the 9114A and 9114B drives.

For a quick copy its OK, not recommended for long term use.

**vp

                  
Re: HP9114A Disc Drive Problem
Message #6 Posted by David Smith on 12 Feb 2004, 1:42 p.m.,
in response to message #5 by Vassilis Prevelakis

I just checked some diskettes I wrote over 10 years ago... no problems found.


[ Return to Index | Top of Index ]

Go back to the main exhibit hall