The Museum of HP Calculators

HP Forum Archive 03

[ Return to Index | Top of Index ]

Problem with 48G+
Message #1 Posted by Gobin on 9 July 2000, 9:21 a.m.

I just got a service replacement [48G+] from HP and I transferred some programs to my 48G+. Problem is after using it for a couple of minutes, it started to go crazy, the screen looked as if part was working and part was not, a set of lines came up on half of the screen and then it just went blank.

      
Re: Problem with 48G+
Message #2 Posted by Tom Lianza on 9 July 2000, 10:59 a.m.,
in response to message #1 by Gobin

You should post this question on the comp.sys.hp48 newsgroup. The experts are all there and they are very friendly. It sounds like a library issue, or a hard failure. If you still have the manual you should find out about doing a "hard" reset. This will erase all your downloaded files, but it should bring the machine back. It is usually done by holding down a key or sequence of keys while turning the machine on. The guys on that news group can help you.


[ Return to Index | Top of Index ]

Go back to the main exhibit hall